- About Us
By Pump UseBy Brand
- Process Solutions
- Service & Maintenance
Wilo-Drain TMW 32
Construction: Basement drainage pump, water-cooled
Submersible pump suitable for stationary, fully automatic operation. A pressure hose of appropriate length is connected for mobile use, while a pipe is connected to the pressure port for stationary applications. A residual-current-operated protection switch for a trigger current of 30 mA that is to be provided onsite (regulation concerning outdoor installation) must be utilised in accordance with EN 60335-2,41.
The pump is continuously cooled by the fluid between the outside shroud of the pump and the stainless steel motor housing. The serially installed thermal motor protection assures a permanent protection of the pump. The pump is equipped with a 3 or 10 m connecting cable with shockproof plug and a float switch
Due to its design, the Wilo-Drain TMW ensures constant turbulence in the suction area of the pump. This results in a clean pump sump.
No fluid-related odours are generated, due to the turbulence and the elimination of the settling sediment connected with it. The maintenance intervals are extended.
Deactivating the Twister (see installation and operating instructions) increases the pump curve by 1 m.
Jacket-cooled, stainless steel-encapsulated, dry electric motor with built-in thermal overload protection and automatic reactivation.
In accordance with DIN EN 60335-2-41, 10 m of electrical connection line should be used for outdoor operation (however note that regulations vary from country to country).
|SKU||Wilo-Drain TMW 32|
Below are related articles that you may find helpful.How to Read a Pump Curve (Blog Article)