ATAC Solutions EDI EOSI Napier Reid Nexom
Axius Water
ATAC services



Service & Repairs
Emergency Services
Drain Cleaning
CCTV Drain Surveys
Remote Monitoring
Confined Space
Service contracts
Reed Bed Maintenance
Filter Bed Refurbishment
Aeration Lane Refurbishment
ATAC product applications

Combined Sewer Overflow
CSO Treatment
ATAC SAF


Download 2022 Sustainability Overview .pdf

Filter specifications

  • Excellent alternative to sand filtration
  • Gravity filtration with limited pressure drop
  • Continuous filtration
  • Filtering surface from 10 m2 to 120 m2
  • Fabricated in stainless steel
  • Backwash system with submersible pump
  • Compact solution, with low hydraulic profile
  • Low maintenance
  • Low energy consumption
  • Standard and Microfibre filtering
  • Cloth media available
  • High efficiency in TSS removal — < 5 mg TSS/l at the outlet

FREE Estimate

MITA Pile Cloth Filters: Enhancing Wastewater Treatment Efficiency

MITA Pile Cloth Filters are designed to provide both surface and deep filtration, combining the advantages of these two techniques. The filters utilise special types of cloth made from free fibers, which ensure high mechanical strength and excellent separation of solids.

The cloth is either fitted on a drum or stacked on a vertical shaft, depending on the model. These filters are made of durable AISI 304 stainless steel, ensuring longevity and resistance to corrosion.

Mita Cloth Filters

MITA Cloth Filter Operating Principle

The operating principle of MITA Pile Cloth Filters is based on gravity flow. The unit remains completely at rest during the filtration process, eliminating the need for reserve units or service water. The water to be treated is directed to the filter’s containment tank, which operates submerged. As the water passes through the filter cloth, the solids are captured and retained by the fibers. The clean water is then discharged through the drum or the central shaft of the filter.

Filtering surface depends on MITA Filter model:

  • Vertical range is 2/10 – 6/30 units (10 m2 – 30 m2 cloth area)
  • Horizontal range is from 8/40 up in stages to a 24/120 unit (40-120 m2 cloth area)
  • Drum range is TF2, TF4 and TF6 (2 m2, 4 m2 and 6 m2 cloth area)
Get a free estimate

To maintain optimal filtration capacity, MITA Pile Cloth Filters are equipped with a backwash system. When the differential pressure reaches a certain level, the backwash device is activated. This device, consisting of suction pumps and nozzles, removes the solids trapped in the cloth, restoring the filter’s efficiency. The removed sludge and suction water are returned upstream, minimising waste and environmental impact.

Get a free estimate

By incorporating these filters into the treatment process, impressive results can be achieved, with solids removal rates between 50% and 80% of the TSS in the feed sample. The filters can reduce the effluent’s TSS levels to as low as <5 mg/L and achieve total phosphorus values of 0.25 mg/L after ferric additions.  

Get a free estimate

MITA Pile Cloth Filters are versatile and can be applied in various wastewater treatment scenarios. Their primary use is in tertiary treatment, where they act as a final step before the discharge of treated wastewater. These filters have proven to be effective in reducing both solids and phosphorus levels, ensuring compliance with strict environmental regulations.

Get a free estimate

Emergency Hire Units

Please use the form below to request a quote for our emergency hire units.